How should we choose appropriate small punch from the specifications?
The nominal pressure of small punch force must be greater than stamping process. But long trip to work process, is not only just meet technological force size, must consider to satisfy their work load curve at the same time. (2) small punch stroke should satisfy parts can get required size in height, and after completion of the stamping process can be smoothly from the mold. To stretch, the schedule shall in parts height more than two times. (3) small punch stroke number should accord with the requirement of productivity. (4) small punch the closing of the height, the size of the work mesa, slide block size, die hole size handle wants to be able to satisfy the requirement of the mould correct installation, small blunt ? for a crank
Workshop environment control: a clean small punch can make the operator or maintenance personnel can quickly find when problem occurred. Such as oil leakage, leakage, fracture and so on, if small punch is clean, simple can find out its location.
Electrical work to relevant professional solution: only by qualified electrical technicians for small punch press electrical line maintenance, but you can still check whether the small punch the bulb on the control panel is normal, each class to make sure that the light bulb in the work, and correctly show that small punch for various operating conditions.
Ensure the equilibrium position of the small punch: get the precise balance of small punch can work better, so the best ? conducted once a year
